Just an for your information, the newest Mavic Pro RAW converter is better than the original, but when I use it there is still far too much vignetting to allow me to process my multi-frame panoramas through it before stitching.
Could you, please, provide me with some samples for the investigation?
Here is an example (zipped DNG), but just about any photo from a Mavic Pro will illustrate the issue, at least in my experience.dji_0004.zip (13.5 MB)
Thank you. We will investigate.
In the meantime we are working over the vignetting improvement for DJI.
I’ve joined the forum to comment on this; seeing excessive vignetting w Mavic Pro; switch to manual and can remove it, maybe 35-50% with the slider
So wonder what’s happened since Feb…
Well, as far as I see it’s reported as fixed. Could you, please, test PL1.2 and let us know your results?
Thanks for the prompt reply
Just checked; I do have 1.2, latest update; using Mac.
Taking photos with max width, not sure if that is relevant. But also, I had used the Mavic Pro module earlier, and not really noticing vignetting, so wonder if the vignetting part of the module has somehow stopped working with a recent update to DXO Labs.
Just now, tried vignetting correction off; and to my eyes looked the same as with “auto” [using module].
With manual, I set slider to 43 to pretty much eliminate vignetting.
Attaching the auto shot here.
Okay, could you, please, provide me with the image and I re-open the ticket for that.
I’ve attached two images; one with auto correction [as if no correction applied]; the other manually corrected.
Not sure if you’ve seen them.
I see these images but they are from DxO PL and I need the original one.
If you do not want to post them public, you can upload them here in private - http://upload.dxo.com/
OK, started upload; put 00000 as ticket number, my email address
Smaller files uploaded
Thank you @DocMartinHK
I’ve got your files but they are the outputs from Photolab and can’t be used for the investigation. I need this file Lai_Chi_Wo_Double_Haven_mavic_17June2018_142.DNG for the test. Could you, please, upload it?
Oh, sorry; at one point seemed it had fully uploaded, after seeming stuck at 1%
Just had it stuck at 0% for some time; so I’ve put here:
hope this helps!
Thank you, now I’ve got it.
Problem has been identified and fixed. We will release a fix for PhotoLab 1.2 soon. We’ll let you know when it’s ready.
Thanks; much appreciated!
PhotoLab 1.2.1 is available and contains fix for DJI Mavic Pro.
Thanks for letting me know; been away so taken a while to reply.
Already done update [before looking down inbox to see this], and noticed that the Mavic photos from my trip look good in PhotoLab, without the vignetting.
Thanks to you and other DXO team members!